Jiangsu slag crusher Description: slag crusher is equivalent to two hammer to break into a reasonable combination as a whole, two sets of rotor series, applicable to coal gangue, shale, cinder, wet material, life and crushing of construction waste, cement raw clinker, sand and other raw materials. Jiangsu slag crusher features: 1, double rotor up and down the two-stage crushing each other in series two rotor so that the material crushed by the higher rotor production incurs rapid rotation of the lower rotor hammer again, cavity material with each other rapidly collision, crushing each other, to hammer powder, the effect of powder materials, direct unloading. 2, did not the mesh grate the end, the humidity of materials, not blocked, the traditional the sieve grate with the grinder, not suited to the high moisture content of 8% of the raw material, when the raw material with high moisture content of 10%, easily severe congestion, so that the hammer can not move, the material can not be discharged, or even burn out the motor, seriously affecting production. Machine design does not mesh grate at the end, the moisture content of the material is not strictly required, completely blocking the sieve paste does not exist, does not exist powder can not be discharged, repeat crushed so crushed high efficiency, there is no hammer Invalid wear and tear. 3, double-rotor two-stage crushing, production, the particle size less than 3 mm, 2 mm or less than 80%. Wear combination of hammer, high wear-resistant alloy hammer. Hammer hammer handle in combination with a change of the hammer, do not change the hammer handle. 5, the unique displacement technology transfer gap, worn hammer without repair, mobile location repeated use of a hammer top three hammerhead. You only need one person can easily open and close, not only lightweight, fast and safe, reliable, easy maintenance. Information Number: 376 979 971